Three-Dimensionally Printed Vaginal Rings: Perceptions of Women and Gynecologists in a Cross-Sectional Survey.

Three-dimensional printing technologies can be implemented for the fabrication of personalized vaginal rings (VRs) as an alternative approach to traditional manufacturing. Although several studies have demonstrated the potential of additive manufacturing, there is a lack of knowledge concerning the opinions of patients and clinicians. This study aimed to investigate the perception of women and gynecologists regarding VRs with personalized shapes. The devices were printed with different designs (traditional, "Y", "M", and flat circle) by Fused Deposition Modeling for a cross-sectional survey with 155 participants. Their anticipated opinion was assessed through a questionnaire after a visual/tactile analysis of the VRs. The findings revealed that most women would feel comfortable using some of the 3D-printed VR designs and demonstrated good acceptability for the traditional and two innovative designs. However, women presented multiple preferences when the actual geometry was assessed, which directly related to their age, previous use of the vaginal route, and perception of comfort. In turn, gynecologists favored prescribing traditional and flat circle designs. Overall, although there was a difference in the perception between women and gynecologists, they had a positive opinion of the 3D-printed VRs. Finally, the personalized VRs could lead to an increase in therapeutic adherence, by meeting women's preferences.

25-Hydroxyvitamin D as a biomarker of vitamin D status in plaque psoriasis and other dermatological diseases: a cross-sectional study

ABSTRACT BACKGROUND: Hypovitaminosis D is a public health problem associated with several chronic inflammatory and immunological diseases, including psoriasis. OBJECTIVES: This study aimed to determine the prevalence of hypovitaminosis D in patients with plaque psoriasis. A comparison was made between vitamin D levels in patients with psoriasis and those with other non-inflammatory dermatoses without photosensitivity. In addition, it evaluated the effects of the patients' Fitzpatrick skin phototype and the season of the year on the serum levels of vitamin D. DESIGN AND SETTINGS: A retrospective cross-sectional study was conducted at an outpatient clinic in a university center in Juiz de Fora (MG), Brazil. METHODS: A review of dermatology patients' demographic data, including skin phototype and serum levels of 25-hydroxyvitamin D [25(OH)D], over 12 months in 2016. RESULTS: This study included 554 patients: 300 patients allocated to the plaque psoriasis group and 254 control patients with other dermatological diseases. Regarding the season of the year, 229, 132, 62, and 131 participants were evaluated in summer, autumn, winter, and spring, respectively. As for the skin phototype, 397, 139, and 18 patients had phototypes III, IV, and V, respectively. The serum levels of 25(OH)D were significantly lower in the psoriasis group (24.91 ± 7.16 ng/mL) than in the control group (30.37 ± 8.14 ng/mL). CONCLUSIONS: Hypovitaminosis D (< 30 ng/mL) was present in 76.66% of patients with psoriasis versus 53.94% of control patients. Vitamin D deficiency (< 20 ng/mL) was observed in 25% of the patients with psoriasis versus 8.66% in the control group (P < 0.001). The season and patient's skin phototype were independent predictors of serum vitamin D levels.

Is vitamin D status relevant to psoriasis and psoriatic arthritis? A retrospective cross-sectional study

Abstract BACKGROUND: Psoriasis is a systemic, immune-mediated disease characterized by inflammatory manifestations in the skin and joints. Vitamin D deficiency is currently considered a pandemic and is associated with comorbidities including psoriasis and psoriatic arthritis (PsA). OBJECTIVES: To determine the prevalence of hypovitaminosis D [25(OH)D] in patients with plaque psoriasis, with and without PsA, and of independent predictors of serum 25(OH)D levels. DESIGN AND SETTING: Retrospective cross-sectional study conducted among 300 patients at an outpatient clinic in a university center in Juiz de Fora, Minas Gerais, Brazil. METHODS: Demographic and clinical data (psoriasis area and severity index [PASI], family history, age at onset, disease duration, and the presence of PsA according to Classification Criteria for Psoriatic Arthritis), skin phototype, and season of the year were reviewed. RESULTS: Hypovitaminosis D (< 30 ng/mL) was highly prevalent in patients with psoriasis with and without PsA (82.2% and 74.9%, respectively). An inverse correlation between PASI and vitamin D was found (without PsA r = -0.59 and, PsA r = -0.52, P < 0.001), and multivariate regression revealed that hypovitaminosis D was associated with disease severity, season, and phototype. It was confirmed by binary logistic regression between PASI and vitamin D deficiency (< 30 ng/mL), (odds ratio, OR 1.78 CI: -0.20-0.53, P < 0.001). CONCLUSION: Hypovitaminosis D (< 30 ng/mL) was highly prevalent in psoriatic patients with and without PsA. Season and skin phototype were associated with 25(OH)D levels. An inverse association between PASI and serum 25(OH)D levels was established.

Is vitamin D status relevant to psoriasis and psoriatic arthritis? A retrospective cross-sectional study.

BACKGROUND: Psoriasis is a systemic, immune-mediated disease characterized by inflammatory manifestations in the skin and joints. Vitamin D deficiency is currently considered a pandemic and is associated with comorbidities including psoriasis and psoriatic arthritis (PsA). OBJECTIVES: To determine the prevalence of hypovitaminosis D [25(OH)D] in patients with plaque psoriasis, with and without PsA, and of independent predictors of serum 25(OH)D levels. DESIGN AND SETTING: Retrospective cross-sectional study conducted among 300 patients at an outpatient clinic in a university center in Juiz de Fora, Minas Gerais, Brazil. METHODS: Demographic and clinical data (psoriasis area and severity index [PASI], family history, age at onset, disease duration, and the presence of PsA according to Classification Criteria for Psoriatic Arthritis), skin phototype, and season of the year were reviewed. RESULTS: Hypovitaminosis D (< 30 ng/mL) was highly prevalent in patients with psoriasis with and without PsA (82.2% and 74.9%, respectively). An inverse correlation between PASI and vitamin D was found (without PsA r = -0.59 and, PsA r = -0.52, P < 0.001), and multivariate regression revealed that hypovitaminosis D was associated with disease severity, season, and phototype. It was confirmed by binary logistic regression between PASI and vitamin D deficiency (< 30 ng/mL), (odds ratio, OR 1.78 CI: -0.20-0.53, P < 0.001). CONCLUSION: Hypovitaminosis D (< 30 ng/mL) was highly prevalent in psoriatic patients with and without PsA. Season and skin phototype were associated with 25(OH)D levels. An inverse association between PASI and serum 25(OH)D levels was established.

25-Hydroxyvitamin D as a biomarker of vitamin D status in plaque psoriasis and other dermatological diseases: a cross-sectional study.

BACKGROUND: Hypovitaminosis D is a public health problem associated with several chronic inflammatory and immunological diseases, including psoriasis. OBJECTIVES: This study aimed to determine the prevalence of hypovitaminosis D in patients with plaque psoriasis. A comparison was made between vitamin D levels in patients with psoriasis and those with other non-inflammatory dermatoses without photosensitivity. In addition, it evaluated the effects of the patients' Fitzpatrick skin phototype and the season of the year on the serum levels of vitamin D. DESIGN AND SETTINGS: A retrospective cross-sectional study was conducted at an outpatient clinic in a university center in Juiz de Fora (MG), Brazil. METHODS: A review of dermatology patients' demographic data, including skin phototype and serum levels of 25-hydroxyvitamin D [25(OH)D], over 12 months in 2016. RESULTS: This study included 554 patients: 300 patients allocated to the plaque psoriasis group and 254 control patients with other dermatological diseases. Regarding the season of the year, 229, 132, 62, and 131 participants were evaluated in summer, autumn, winter, and spring, respectively. As for the skin phototype, 397, 139, and 18 patients had phototypes III, IV, and V, respectively. The serum levels of 25(OH)D were significantly lower in the psoriasis group (24.91 ± 7.16 ng/mL) than in the control group (30.37 ± 8.14 ng/mL). CONCLUSIONS: Hypovitaminosis D (< 30 ng/mL) was present in 76.66% of patients with psoriasis versus 53.94% of control patients. Vitamin D deficiency (< 20 ng/mL) was observed in 25% of the patients with psoriasis versus 8.66% in the control group (P < 0.001). The season and patient's skin phototype were independent predictors of serum vitamin D levels.

Coupling of Fused Deposition Modeling and Inkjet Printing to Produce Drug Loaded 3D Printed Tablets.

In the current study, we have coupled Fused Deposition Modelling (FDM) for the fabrication of plain polyvinyl alcohol (PVA) tablets followed by dispensing of minoxidil ethanolic solutions using inkjet printing. The use of a drop-on-solid printing approach facilitates an accurate and reproducible process while it controls the deposition of the drug amounts. For the purpose of the study, the effect of the solvent was investigated and minoxidil ink solutions of ethanol 70% v/v (P70) or absolute ethanol (P100) were applied on the plain PVA tablets. Physicochemical characterization showed that solvent miscibility with the polymer substrate plays a key role and can lead to the formation of drug crystals on the surface or drug absorption in the polymer matrix. The produced minoxidil tablets showed sustained release profiles or initial bursts strongly affected by the solvent grade used for dispensing the required dose on drug loaded 3D printed tablets. This paradigm demonstrates that the coupling of FDM and inkjet printing technologies could be used for rapid development of personalized dosage forms.

Aplicações da manufatura aditiva em oftalmologia / Applications of additive manufacturing in ophthalmology

RESUMO A manufatura aditiva, mais popularmente conhecida como impressão tridimensional, baseia-se no desenvolvimento de um objeto com a ajuda de um software de desenho assistido por computador seguido de sua impressão por meio da deposição de uma matéria-prima, camada por camada, para a construção do produto desejado. Existem vários tipos de técnicas de impressão tridimensional, e o tipo de processo de impressão escolhido depende da aplicação específica do objeto a ser desenvolvido, dos materiais a serem utilizados e da resolução necessária à impressão do produto final. A impressão tridimensional abriu perspectivas na pesquisa e revolucionou o campo das ciências da saúde, com a possibilidade de criação e de desenvolvimento de produtos personalizados de maneira rápida, econômica e de forma mais centralizada do que no processo de manufatura tradicional. As tecnologias de manufatura aditiva remodelaram os diagnósticos médicos; as medidas preventivas e pré-operatórias; o tratamento e a reabilitação, assim como os processos de engenharia de tecidos nos últimos anos. Na oftalmologia, as aplicações da impressão tridimensional são extensas. Modelos anatômicos para aplicação na área da educação e planejamentos cirúrgicos, desenvolvimento de implantes, lentes, equipamentos para diagnósticos, novas aplicações terapêuticas e desenvolvimento de tecidos oculares já estão em desenvolvimento. Por possuir um campo amplo e ser alvo de pesquisa constante, a área oftalmológica permite que a manufatura aditiva ainda seja amplamente utilizada a favor dos médicos e dos pacientes.

ABSTRACT Additive manufacturing, more popularly known as three-dimensional (3D) printing, is based on the development of an object with the help of computer-aided design software followed by its printing through the deposition of a material, layer by layer, to create the desired product. There are several types of 3D printing techniques and the type of printing process chosen depends on the specific application of the object to be developed, the materials to be used, and the resolution required to print the final product. 3D printing has brought new perspectives to research and revolutionized the field of health sciences, with the possibility of creating and developing customized products in a faster, more economical, and more centralized way than in the traditional manufacturing process. Additive manufacturing technologies have reformulated medical diagnostics, preventive, preoperative, treatment, and rehabilitation, as well as tissue engineering processes in recent years. In ophthalmology, the applications of 3D printing are extensive. Anatomical models for application in education and surgical planning, development of implants, lenses, diagnostic equipment, new therapeutic applications, and development of ocular tissues (3D bioprinting) are already under development. As it has a wide field and is the subject of constant research, the ophthalmic area allows additive manufacturing to still be widely used in favor of doctors and patients.

Prevalence of psoriatic arthritis among patients with plaque psoriasis: a Brazilian retrospective study.

BACKGROUND: Psoriatic arthritis is the most frequent and impactful comorbidity among psoriatic patients and appears in most cases after skin disease. Dermatologists play a key role in its early diagnosis and treatment. OBJECTIVE: To determine the prevalence of psoriatic arthritis and associated variables among patients with plaque psoriasis seen at a reference center for treating psoriasis. DESIGN AND SETTING: Retrospective cross-sectional study conducted among 300 patients at an outpatient clinic in a university center in Juiz de Fora, MG, Brazil. METHODS: Standardized records of 300 patients with plaque psoriasis were examined. Demographic data and medical variables relating to psoriasis (Psoriasis Area and Severity Index (PASI), family history, age at onset and disease progression) and psoriasis arthritis (CASPAR criteria) were evaluated. Laboratory and radiographic tests in the medical records were reviewed. RESULTS: Seventy-three (24.3%) of these 300 patients with plaque psoriasis had psoriatic arthritis. Asymmetric oligoarthritis (58.9%) was the most common clinical form, followed by polyarthritis (20.5%), distal interphalangeal arthritis (15.2%) and spondyloarthritis (5.4%). Dactylitis was present in 21.9% and enthesitis in 35.6% of patients. Compared with patients without arthritis, patients with arthritis had higher average age, higher frequency of positive family history of psoriasis, longer duration of evolution and higher PASI rates. CONCLUSION: Psoriatic arthritis is often underdiagnosed. Since dermatologists perform the initial approach, these professionals need to be trained to diagnose this comorbidity and treat it, together with rheumatologists.

Prevalence of psoriatic arthritis among patients with plaque psoriasis: a Brazilian retrospective study

ABSTRACT BACKGROUND: Psoriatic arthritis is the most frequent and impactful comorbidity among psoriatic patients and appears in most cases after skin disease. Dermatologists play a key role in its early diagnosis and treatment. OBJECTIVE: To determine the prevalence of psoriatic arthritis and associated variables among patients with plaque psoriasis seen at a reference center for treating psoriasis. DESIGN AND SETTING: Retrospective cross-sectional study conducted among 300 patients at an outpatient clinic in a university center in Juiz de Fora, MG, Brazil. METHODS: Standardized records of 300 patients with plaque psoriasis were examined. Demographic data and medical variables relating to psoriasis (Psoriasis Area and Severity Index (PASI), family history, age at onset and disease progression) and psoriasis arthritis (CASPAR criteria) were evaluated. Laboratory and radiographic tests in the medical records were reviewed. RESULTS: Seventy-three (24.3%) of these 300 patients with plaque psoriasis had psoriatic arthritis. Asymmetric oligoarthritis (58.9%) was the most common clinical form, followed by polyarthritis (20.5%), distal interphalangeal arthritis (15.2%) and spondyloarthritis (5.4%). Dactylitis was present in 21.9% and enthesitis in 35.6% of patients. Compared with patients without arthritis, patients with arthritis had higher average age, higher frequency of positive family history of psoriasis, longer duration of evolution and higher PASI rates. CONCLUSION: Psoriatic arthritis is often underdiagnosed. Since dermatologists perform the initial approach, these professionals need to be trained to diagnose this comorbidity and treat it, together with rheumatologists.

Plinia cauliflora (Mart.) Kausel: toxicological assays, biological activities, and elemental analysis of organic compounds.

Jaboticaba, Plinia cauliflora (Mart.) Kausel, is a Brazilian berry traditionally used in folk medicine as treatment for some health conditions. Phenolic compounds such as flavonoids and anthocyanins have previously been detected in the fruit. This current study aimed to evaluate the toxicological effects of jaboticaba peel extract (JPE) on Artemia salina, L929, and MDA-MB-231 cell lines. Besides, JPE antioxidant, acetylcholinesterase, and antifungal activities, and elemental analysis CHNS were also tested. JPE had moderate toxicity (LD50 = 360.92 µg mL-1) on A. salina, non-toxic effect on L929 cell line, and decreased the viability of cancer cell line MDA at 1,000 µg mL-1 and 500 µg mL-1 concentrations. The antioxidant activity toward 2,2-diphenyl-1-picrylhydrazyl (DPPH) performed IC50 = 37.45 ± 0.17 µg mL-1, whereas 45.7% of acetylcholinesterase activity was inhibited. By its elemental composition, JPE is an alternative food supplement and dermocosmetic component. Antifungal potential toward Candida strains was not observed.

Towards the Importance of a Roller Mill in Compounding Practice: An Experimental Approach.

There are a substantial amount of suppliers for roller mills in the market, but there is a lack of scientific evidence of a roller mill's capacity to improve particle size reduction/distribution or homogenization. In this concise paper, we evaluate the use a roller mill in the final steps of compounding semisolid dosage forms. We performed three simple tests to verify these claims: 1) particle size evaluation through dynamic light scattering and scanning electron microscopy techniques, 2) content uniformity through high-performance liquid chromatography technique, and 3) cross contamination through a cleaning validation method. Dynamic light scattering and scanning electron microscopy techniques of benzoyl peroxide 5% (gel) and testosterone 1% (cream) showed a significant reduction on particle diameter. Content uniformity testing of creams containing progesterone 5%, estradiol 0.1%, and estriol 0.4% showed better homogeneity when using the roller mill. Finally, the proposed cleaning procedure decreased the presence of the compounded preparation to a "none-detection" level after the procedure. This suggests that the roller mill used does, in fact, play a role in the final aspect and quality of pharmaceutical semisolid dosage forms.

Transdermal Delivery of Metformin Hydrochloride from a Semisolid Vehicle.

Metformin hydrochloride is a traditional, FDA-approved drug used as a first-line drug of choice to treat type 2 diabetes. Research has shown metformin hydrochloride effective in injuries, including age-related maladies. The purpose of this ex vivo study was to evaluate the use of a commercial transdermal vehicle as a semisolid, liposomal vanishing cream (Pentravan) to deliver metformin hydrochloride through the human skin. The experiments were conducted as percutaneous absorption assay in Franz Diffusion Cells, coupled with freshly excised human skin and analyzed by high-performance liquid chromatography. Both methods were based on validated methods of both the United States Pharmacopeial Convention, Inc. and the International Conference on Harmonization. A 46.7% permeation percentage was found, with a drug flux of 3.91 µg cm-2 h-1 and a lag time of 0.51 h, following pseudo first-order absorption kinetics. These results showed that transdermal metformin hydrochloride can be an option for patients searching for diverse clinical effects.

Compounded Orodispersible Films with Natural Ingredients for Halitosis: A Clinical Experience.

Halitosis can be described as unpleasant odors emanating from the oral cavity. It is usually associated with decomposition action of bacteria present mainly on the back of the tongue and periodontal pockets, and able to produce volatile sulfur compounds. We conducted a study at the Faculty of Dentistry, Federal University of Juiz de Fora and evaluated the therapeutic effect of two natural extracts, Camellia sinensis (green tea) and resveratrol in the form of oral polymer films, to control halitosis. Fifty volunteers (students of health courses) participated in the research after orientation and signing the informed consent form. The anamnesis was made by researchers. The physical examination was made to verify the inclusion criteria. Each participant received 45 polymeric films to be consumed in 15 days (3 films per day). Measurements of the volatile sulfur compound levels were performed using a halimeter in two stages: 1) before use and 2) 15 days after the first administration. Results showed a statistically significant reduction in volatile sulfur compound levels in 71.79% of the volunteers. We concluded that the compounded orodispersible films containing green tea and resveratrol demonstrated excellent results in reducing halitosis.

Compatibility of Baclofen, Carvedilol, Hydrochlorothiazide, Mercaptopurine, Methadone Hydrochloride, Oseltamivir Phosphate, Phenobarbital, Propranolol Hydrochloride, Pyrazinamide, Sotalol Hydrochloride, Spironolactone, Tacrolimus Monohydrate, Ursodeoxycholic Acid, and Vancomycin Hydrochloride Oral Suspensions Compounded with SyrSpend SF pH4.

Compounded liquid medication is frequently required in children to allow easy dose adjustment and overcome swallowing difficulties. The objective of this study was to evaluate the stability of oral suspensions compounded with SyrSpend SF PH4 and the commonly used active pharmaceutical ingredients baclofen 2.0 mg/mL, carvedilol 5.0 mg/mL, hydrochlorothiazide 2.0 mg/mL, mercaptopurine 10.0 mg/mL, methadone hydrochloride 10.0 mg/mL, oseltamivir phosphate 6.0 mg/mL, phenobarbital 9.0 mg/mL and 15.0 mg/mL, propranolol hydrochloride 0.5 mg/mL and 5.0 mg/mL, pyrazinamide 100.0 mg/mL, spironolactone 2.0 mg/mL and 2.5 mg/mL, sotalol hydrochloride 5.0 mg/mL, tacrolimus monohydrate 0.5 mg/mL, ursodeoxycholic acid 20.0 mg/mL, and vancomycin hydrochloride 25.0 mg/mL. Suspensions were compounded with raw powders, except for mercaptopurine, pyrazinamide, and sotalol hydrochloride, which were made from commercial tablets. Stability was assessed by measuring the percentage recovery at 0 (baseline), 60 days, and 90 days after compounding for suspensions made with raw powders, which were stored at 2ÅãC to 8ÅãC. The stability of tablets, which were stored at 2ÅãC to 8ÅãC and 20ÅãC to 25ÅãC, was assessed by measuring the percentage recovery at 0 (baseline), 7 days, 14 days, 30 days, 60 days, and 90 days. Active pharmaceutical ingredients quantification was performed by ultraviolet high-performance liquid chromatography via a stability-indicating method. Given the percentage of recovery of the active pharmaceutical ingredients within the suspensions, the beyond-use date of the final products (active pharmaceutical ingredients + vehicle) was at least 90 days for all suspensions in the conditions tested. This suggests that SyrSpend SF PH4 is suitable for compounding active pharmaceutical ingredients from different pharmacological classes.

[Determinants of patents in the life sciences and health sciences at federal universities in Minas Gerais State, Brazil: an analysis of panel data for 1995-2016]. / Determinantes das patentes em ciências da vida e da saúde nas universidades federais de Minas Gerais, Brasil: uma análise de dados em painel para o período 1995-2016.

In the 1990s, the development of microelectronics and communication technologies spawned the information technology paradigm, characterized by an intensity of information which, transformed into knowledge and innovation, plays a crucial role for development. In order for this to occur, countries need to build appropriate institutional arrangements. This led to the Triple Helix model for systems innovation, which views innovation and technical progress in a Knowledge Economy as the result of a complex set of relations between universities, companies, and government. In this context, the current study aims to identify the impact of knowledge production and public policies for the production of patent applications by life sciences and health sciences researchers affiliated with federal universities in the State of Minas Gerais, Brazil. The analysis covered the years 1995 to 2016 and used econometric techniques in panel data. According to the findings, educational factors (thesis supervision), economic factors (technological products and the provision of technological services), and political factors (legal framework, financial resources, and incentive policies) impact the production of patent applications by the selected researchers. The results reveal efforts by government, although incipient, in the attempt to promote a technological leap.

Na década de 1990, com o desenvolvimento da microeletrônica e das tecnologias de comunicações, emergiu o paradigma da tecnologia da informação, caracterizado pela intensidade de informação que, transformada em conhecimento e inovação, desempenha um papel crucial para o desenvolvimento. Entretanto, para que isso ocorra, é necessário que os países construam arranjos institucionais apropriados. Com isso, surge o modelo de sistemas de inovação da Tríplice Hélice, que compreende a inovação e o progresso técnico, em uma Economia do Conhecimento, como o resultado de um conjunto complexo de relações entre universidade, empresa e governo. Nesse contexto, o presente estudo tem o objetivo de identificar o impacto da produção de conhecimento e das políticas públicas para a produção de depósitos de patentes dos pesquisadores pertencentes ao domínio científico Ciências da Vida e da Saúde, no âmbito das universidades federais de Minas Gerais, Brasil. A análise considerou o período de 1995 a 2016, e utilizou técnicas de econometria em painel de dados. Os resultados mostram que fatores educacionais (orientações em pós-graduação), econômicos (produtos tecnológicos e prestação de serviços tecnológicos) e políticos (arcabouço legal, recursos financeiros e políticas de estímulo) impactam a produção de depósitos de patentes dos pesquisadores selecionados. Por meio da análise dos resultados, podem-se perceber os esforços do governo, mesmo que ainda incipientes, na tentativa de promover o salto tecnológico.

Durante la década de 1990, con el desarrollo de la microelectrónica y las tecnologías de la comunicación, surgió el paradigma de la tecnología de la información, caracterizado por la intensidad de información que, transformada en conocimiento e innovación, desempeña un papel crucial para el desarrollo. No obstante, para que esto ocurra, es necesario que los países construyan marcos institucionales apropiados. Por ello, surge el modelo de sistemas de innovación de Triple Hélice, que abarca innovación y progreso técnico en una Economía del Conocimiento, como resultado de un conjunto complejo de relaciones entre universidad, empresa y gobierno. En este contexto, el presente estudio tiene como objetivo de identificar el impacto de la producción de conocimiento y de las políticas públicas, con el fin de producir depósitos para patentes de investigadores, pertenecientes al campo científico de las Ciencias de la Vida y la Salud, en el ámbito de las universidades federales de Minas Gerais, Brasil. El análisis consideró el período de 1995 a 2016, y utilizó técnicas de econometría de panel de datos. Los resultados muestran que los factores educacionales (orientación durante el posgrado), económicos (productos tecnológicos y prestación de servicios tecnológicos) y políticos (marco legal, recursos financieros y políticas de estímulo) impactan en la producción de depósitos para patentes de los investigadores seleccionados. Mediante el análisis de los resultados, se pueden percibir los esfuerzos del gobierno, aunque sean incipientes, en la tentativa de promover el salto tecnológico.

Determinantes das patentes em ciências da vida e da saúde nas universidades federais de Minas Gerais, Brasil: uma análise de dados em painel para o período 1995-2016 / Determinants of patents in the life sciences and health sciences at federal universities in Minas Gerais State, Brazil: an analysis of panel data for 1995-2016 / Determinantes de las patentes en el ámbito de las ciencias de la vida y la salud en universidades federales de Minas Gerais, Brasil: un análisis de datos de panel durante el período 1995-2016

Na década de 1990, com o desenvolvimento da microeletrônica e das tecnologias de comunicações, emergiu o paradigma da tecnologia da informação, caracterizado pela intensidade de informação que, transformada em conhecimento e inovação, desempenha um papel crucial para o desenvolvimento. Entretanto, para que isso ocorra, é necessário que os países construam arranjos institucionais apropriados. Com isso, surge o modelo de sistemas de inovação da Tríplice Hélice, que compreende a inovação e o progresso técnico, em uma Economia do Conhecimento, como o resultado de um conjunto complexo de relações entre universidade, empresa e governo. Nesse contexto, o presente estudo tem o objetivo de identificar o impacto da produção de conhecimento e das políticas públicas para a produção de depósitos de patentes dos pesquisadores pertencentes ao domínio científico Ciências da Vida e da Saúde, no âmbito das universidades federais de Minas Gerais, Brasil. A análise considerou o período de 1995 a 2016, e utilizou técnicas de econometria em painel de dados. Os resultados mostram que fatores educacionais (orientações em pós-graduação), econômicos (produtos tecnológicos e prestação de serviços tecnológicos) e políticos (arcabouço legal, recursos financeiros e políticas de estímulo) impactam a produção de depósitos de patentes dos pesquisadores selecionados. Por meio da análise dos resultados, podem-se perceber os esforços do governo, mesmo que ainda incipientes, na tentativa de promover o salto tecnológico.

In the 1990s, the development of microelectronics and communication technologies spawned the information technology paradigm, characterized by an intensity of information which, transformed into knowledge and innovation, plays a crucial role for development. In order for this to occur, countries need to build appropriate institutional arrangements. This led to the Triple Helix model for systems innovation, which views innovation and technical progress in a Knowledge Economy as the result of a complex set of relations between universities, companies, and government. In this context, the current study aims to identify the impact of knowledge production and public policies for the production of patent applications by life sciences and health sciences researchers affiliated with federal universities in the State of Minas Gerais, Brazil. The analysis covered the years 1995 to 2016 and used econometric techniques in panel data. According to the findings, educational factors (thesis supervision), economic factors (technological products and the provision of technological services), and political factors (legal framework, financial resources, and incentive policies) impact the production of patent applications by the selected researchers. The results reveal efforts by government, although incipient, in the attempt to promote a technological leap.

Durante la década de 1990, con el desarrollo de la microelectrónica y las tecnologías de la comunicación, surgió el paradigma de la tecnología de la información, caracterizado por la intensidad de información que, transformada en conocimiento e innovación, desempeña un papel crucial para el desarrollo. No obstante, para que esto ocurra, es necesario que los países construyan marcos institucionales apropiados. Por ello, surge el modelo de sistemas de innovación de Triple Hélice, que abarca innovación y progreso técnico en una Economía del Conocimiento, como resultado de un conjunto complejo de relaciones entre universidad, empresa y gobierno. En este contexto, el presente estudio tiene como objetivo de identificar el impacto de la producción de conocimiento y de las políticas públicas, con el fin de producir depósitos para patentes de investigadores, pertenecientes al campo científico de las Ciencias de la Vida y la Salud, en el ámbito de las universidades federales de Minas Gerais, Brasil. El análisis consideró el período de 1995 a 2016, y utilizó técnicas de econometría de panel de datos. Los resultados muestran que los factores educacionales (orientación durante el posgrado), económicos (productos tecnológicos y prestación de servicios tecnológicos) y políticos (marco legal, recursos financieros y políticas de estímulo) impactan en la producción de depósitos para patentes de los investigadores seleccionados. Mediante el análisis de los resultados, se pueden percibir los esfuerzos del gobierno, aunque sean incipientes, en la tentativa de promover el salto tecnológico.

Stability of Alprazolam, Atropine Sulfate, Glutamine, Levofloxacin, Metoprolol Tartrate, Nitrofurantoin, Ondansetron Hydrochloride, Oxandrolone, Pregabaline, and Riboflavin in SyrSpend SF pH4 Oral Suspensions.

The objective of this study was to evaluate the stability of 10 commonly used active pharmaceutical ingredients compounded in oral suspensions using an internationally used suspending vehicle (SyrSpend SF PH4): alprazolam 1.0 mg/mL, atropine sulfate 0.1 mg/mL, glutamine 250.0 mg/mL, levofloxacin 50.0 mg/mL, metoprolol tartrate 10.0 mg/mL, nitrofurantoin 2.0 mg/mL, ondansetron hydrochloride 0.8 mg/mL, oxandrolone 3.0 mg/mL, pregabaline 20.0 mg/mL, riboflavin 10.0 mg/mL. All suspensions were stored at both controlled refrigeration (2°C to 8°C) and controlled room temperature (20°C to 25°C). Stability was assessed by measuring the percent recovery at varying time points throughout a 90-day period. Active pharmaceutical ingredients quantification was performed by high-performance liquid chromatography via a stability-indicating method. Given the percentage of recovery of the active pharmaceutical ingredients within the suspensions, the beyond-use date of the final products (active pharmaceutical ingredients + vehicle) was at least 90 days for all suspensions with regard to both temperatures. This suggests that the vehicle is stable for compounding active pharmaceutical ingredients from different pharmacological classes.

Technological Device for Manufacturing Transdermal Films: Possible Applications to the Individualized Treatment for Erectile Dysfunction.

Pharmacological advances in erectile dysfunction (ED) treatment have aroused growing interest among health professionals towards sexual dysfunction, generating an increasing demand for dosage forms and drug delivery systems, including tadalafil. This study aimed to develop a device to generate patches that would enable drug dosage individualization and transdermal administration. To create such a mechanical device, technical drawings were made using the CAD software. A functional prototype was built, and a pharmaceutical formulation containing tadalafil (10 mg cm-2) was prepared. An analytical method (HPLC) was developed and validated. The average weight of adhesives (n = 10) was 241.01 mg; the content uniformity for preparations in unit doses (n = 10) was 108.93%, and a CV <2% for intraadhesive tadalafil content (n = 40) was observed. The ex vivo permeation of patches containing tadalafil was determined in Franz cells (n = 6), equipped with human skin and kept for 12 h in contact with the patch, by using the tape stripping method. The optimized method showed acceptable confidence limits within the range recommended by regulatory agencies, being validated for use in this ex vivo permeation study. Tadalafil could permeate to the viable epidermis and dermis (5.7%). The created device produced homogeneous patches of tadalafil, showing such technological innovation as to be feasible in individualized therapy for the treatment of ED.

Ex vivo Skin Permeation Evaluation of An Innovative Transdermal Vehicle Using Nimesulide and Piroxicam as Model Drugs.

BACKGROUND: The transdermal dosage forms presented a limited usage for a long time, for it was believed that the stratum corneum, the outermost layer of epidermis, made it impracticable the permeation of medications through the skin. Studies exploring this area came up with strategies to overcome this barrier; for example, creating a transdermal vehicle to facilitate the drug absorption. OBJECTIVE: This study aimed to evaluate a new transdermal vehicle through the comparison of its permeation profile and the profile of commercial products, using nimesulide and piroxicam, non steroidal anti-inflammatory drugs. METHODS: Four different products were evaluated: nimesulide and piroxicam compounded with the new vehicle (emulsion) and commercial nimesulide and piroxicam gels. Ex vivo permeation experiments using Franz-type diffusion cell equipment were conducted, using human skin as membrane. For evaluation of permeated active pharmaceutical ingredients concentrations, we performed quantification from the receptor solution, stratum corneum and viable epidermis + dermis, through high-performance liquid chromatography analyses. RESULTS: The new vehicle promoted increased permeation of active pharmaceutical ingredients through the viable epidermis and dermis, when compared to commercial products, but the stratum corrneum continued to keep the highest retention. CONCLUSION: The innovative vehicle was capable of enhancing the transdermal absorption of active pharmaceutical ingredients from the compounded formulations, thus, demonstrating the capability thereof to improve the permeability of active pharmaceutical ingredients by transdermal use.

Transdermal Oxandrolone: Ex Vivo Percutaneous Absorption Study.

BACKGROUND: Oxandrolone is a potent synthetic testosterone analogue that possesses strong anabolic property and weak androgenic activity. Apart of their clinical implicances, oral oxandrolone can potentially promote several adverse effects. It is known that the transdermal delivery of drugs may represent a means to avoid or minimize oral adverse effects Thus, the objective of this study was to evaluate the permeability of oxandrolone in human skin on a preliminary basis for possible future determination of the transdermal route as an alternative to oral treatments. METHODS: We used a percutaneous absorption assay in Franz diffusion cells coupled with freshly excised human skin. The drug release kinetics were determined to predict the efficiency of this alternative route for the drug. RESULTS: Nearly 236 µg (86.7%, in terms of applied dose) of the product was prevented to permeate due to the barrier function of the stratum corneum (SC); 21.6% reached the receptor medium (RM), and the remaining 4.3% were quantified within viable layers of the skin (in vivo, dermis is vascularized). The total amount of drug able to exert effect is the sum of the drug quantified within remained skin (RS) and RM: then, a total of 247.6 µg of oxandrolone (25.9% of the applied dose) would be able to permeate through a non damaged skin. The accuracy of the data is demonstrated by the calculated mass balance (average recovery = 112.6%). CONCLUSION: Transdermal oxandrolone could be a viable alternative for traditional oral form, once clinical studies are conducted to prove this hypothesis.